Speak to one of our team now +44 (0)1493 653535
Speak to one of our team now +44 (0)1493 653535
Find answers to the most common questions about ASAMS’ UKAS-accredited testing, reporting and scheduling. Where relevant, we link directly to service pages for full details.
ASAMS Ltd is accredited to ISO/IEC 17025 (UKAS No. 0935). Tests are performed under accreditation where specified on quotations and reports. See our service pages and UKAS schedule for the accredited methods and limits. Where tests are not covered by the accreditation this will be specifically discussed before beginning the testing.
Under UKAS flexible scope, ASAMS may perform tests on similar products against methods not explicitly listed, provided no new measurement principles are introduced and parametric boundaries remain within accredited ranges (per controlled procedure QP08).
Email sales@asams.co.uk or call +44 (0)1493 653535. We’ll confirm scope, accreditation status, turn around and pricing.
Requirements vary by test which will be advised during quotation.
Yes, witnessing can be arranged subject to availability. Clients typically have a contract with the witnessing authority directly, but ASAMS are happy to liaise with witnesses to arrange suitable testing times and dates.
Yes—Charpy impact testing can be performed at −196°C and −123°C to ambient, as listed in our accreditation schedule. See Mechanical Testing for details.
Yes—ASAMS performs the tests designated in major codes (ISO 9606/15614, ASME IX, AWS D1.1). See Weld Certification for the full standard list and booking guidance. A complete service can also be facilitated through approved sub-contractors.
Macro/microstructure assessment, grain size (ASTM E112), ferrite content (ASTM E562/OP27 Feritscope), intermetallic phases in duplex stainless (ASTM A923 Method A), coating thickness (ASTM B487), and more. See Metallography.
Yes—our engineers combine accredited testing with metallurgical expertise to provide root-cause analysis and practical recommendations. See Failure Analysis & Metallurgical Consultancy.
Pitting/crevice corrosion (ASTM G48; ASTM A923 Method C) and intergranular corrosion for austenitic stainless steels (ASTM A262 Practices A & E). See Corrosion Testing.
Yes—OES, ICP and XRF PMI are available. All of these services are provided through approved sub-contractors. See Chemical Analysis.
Unless otherwise agreed, acceptance criteria are provided by your specification or referenced standards/codes. We report measured values and indicate pass/fail when criteria are supplied. Client specified acceptance criteria can be used but additional charges apply to cover costs for ensuring compliance with UKAS statements of conformity requirements. See decision rules.
You’ll receive a clear digital test report (PDF) with all results and relevant details. For UKAS‑accredited work, the report carries the ASAMS UKAS logo and our accreditation number (Testing Laboratory No. 0935). Any work outside the scope of accreditation is clearly marked as unaccredited. Where traceability or certification is required (e.g., weld qualification), results are cross‑referenced to the applicable standard(s). Raw test data can be supplied for some tests if required.
Contact us with the report reference. We’ll review, advise on retest feasibility, and handle complaints through our complaints procedure.
Package securely and include paperwork specifying client details as a minimum to allow ASAMS to contact you. Chain of custody is maintained upon receipt.
Destructive tests consume specimens; remnants and remaining material can be returned on request, subject to additional charges. ASAMS are happy to prepare samples for return via client courier or collection.